Auger Size: 24" x 42"

GMR 300is designed to fit most 14-24 horsepower tractors equipped with a Category 0 - 3 point hitch and a 540 rpm PTO.
It fits the 16 HP Kubota Model B7100. Capable of handling 6", 9" and 12" diameter standard duty 30" length augers, this 3 position boom allows the unit to fit a variety of tractor models.
A lever is provided for the operatorto adjust the auger starting angle
The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals and has a 5 year limited warranty. Built for years of trouble-free work with a minimum amount of maintenance.

NOTE: Most tractors of this size have lift arms made of ? inch diameter, Category I pins, but with the 20 inch Category 0 spacing. Tractors with very short lift arms made for 5 /8 inch diameter pins may not be suitable for digging post holes. (Special ? inch diameter pins are available for those tractors that can handle the post hole digger).
Auger Size: 6" - 12"
(F) HP or GPM Up to 25 (F) HP

GMR 720 Heavy Duty post hole digger easily handles augers from 6" to 24" with 2" inside diameter opening. A three position boom adjustment allows for maximum auger use. Constructed of heavy duty steel materials, the GMR 720 is designed for years of work.

Auger Size: 12" x 42"

GMR is designed to fit most 14-24 horsepower tractors equipped with a Category 0 - 3 point hitch and a 540 rpm PTO.
It fits the 16 HP Kubota Model B7100. Capable of handling 6", 9" and 12" diameter standard duty 30" length augers, this 3 position boom allows the unit to fit a variety of tractor models.
A lever is provided for the operatorto adjust the auger starting angle
The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals and has a 5 year limited warranty. Built for years of trouble-free work with a minimum amount of maintenance.

NOTE: Most tractors of this size have lift arms made of ? inch diameter, Category I pins, but with the 20 inch Category 0 spacing. Tractors with very short lift arms made for 5 /8 inch diameter pins may not be suitable for digging post holes. (Special ? inch diameter pins are available for those tractors that can handle the post hole digger).
Auger Size: 12" x 30"

12" Standard Duty Single Flight Auger with teeth. 2" ID Round with 42" useable flighting length.
Auger Size: 12" x 42"

6" Standard Duty Single Flight Auger w/teeth.
2" ID round with 42" useable flighting length.

6" Heavy Duty Single Flight Auger w/teeth.
2" ID round with 42" useable flighting length.

GMR 300is designed to fit most 14-24 horsepower tractors equipped with a Category 0 - 3 point hitch and a 540 rpm PTO.
It fits the 16 HP Kubota Model B7100. Capable of handling 6", 9" and 12" diameter standard duty 30" length augers, this 3 position boom allows the unit to fit a variety of tractor models.
A lever is provided for the operatorto adjust the auger starting angle
The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals and has a 5 year limited warranty. Built for years of trouble-free work with a minimum amount of maintenance.

NOTE: Most tractors of this size have lift arms made of ? inch diameter, Category I pins, but with the 20 inch Category 0 spacing. Tractors with very short lift arms made for 5 /8 inch diameter pins may not be suitable for digging post holes. (Special ? inch diameter pins are available for those tractors that can handle the post hole digger).
Auger Size: 6" x 30"

Auger Size: 9" x 42"

Yoke Weldment (Model 925 PHD)

TONGUE 10 CU. FT 1"

Fits Worksaver hydraulic post drivers previously manufactured without post holders. Spring loaded, holds post in position until post is started. Not for “T” posts.

Ability to reverse the auger should it become entangled in roots or rocks.
No need to replace shear-bolts or repair slip clutches as required on PTO operated units.
No PTO lifting restrictions with tractor, loader, or backhoe boom.
Models ending with “14HC” are designed for 5–10 gpm @ 1500–3000 PSI hydraulic systems.
3 point Hydraulic (includes hoses) (use 6"–14" augers)
Auger Size: 6" - 14"
(F) HP or GPM 5 - 10 (F) GPM

GMR 709025 Down Force Kit is designed for the GMR 925 post hole digger (925 PHD). GMR 709025 provides down force pressure to dig through hard soil surfaces.

Park Stand Kit 925 Digger

Holder for Steel T Posts

The HPD-16 model with manual adjust quickly delivers a tight post set for wood or steel posts. Base model offers manual adjustment cranks and bubble level for perfect vertical alignment on flatland or hillsides. Transport lock pin secures unit for travel and storage. Greaseable pivot points provide reliable movement of the driver.

Max. Post Size: 5” x 9’
Impact at Full Stroke: 32,000 lbs.
Impact at Half Stroke: 16,000 lbs.
Mount Type: 3-pt. Cat I/II
Tilt Adj. Front/Back: 10° each way
Tilt Adj. Side/Side: 17° each way
Manual Adjust: Yes
Stabilizer Legs: Standard
Slide Blocks Material: Nyrim
Spring Post Holder: Standard
Min. Tractor Size: 20-22 hp
Rear Hitch Category: Cat. I or II
Min. Hydraulic Req.: 3-4 GPM
QuickChange Rod Seal: Yes
Q-springs: N/A
Valve(s) Sgl.: Spool
Hoses less couplers: Standard

Worksaver GMR HPD16 post drivers for skid steers help you work with these small compact workhorses. Gives you greater range for front and rear angle adjustment.

Enables you to maneuver into tight areas that farm tractors may not be able to navigate.

Adjustable stabilizer legs provide solid footing.

For Case/IH, John Deere, New Holland, Bobcat, Gehl, Mustang and other brands.

Special return line fittings and hoses solve return line problems; help prevent dirt contamination of hydraulic oil.

Park Stand Kit 500/720 Digger